12V 7A INVERTER BATTERY CHARGER
|
|
|
|
This
item is
from our
Battery Chargers / Starters category
|
|
|
|
|
|
12V 7A INVERTER BATTERY CHARGER - 13606-48485
|
|
|
|
|
|
|
|
12V 7A INVERTER BATTERY CHARGER
High output compact electronic charger for use with any type of lead acid battery with a capacity of up to 225Ah. As long as the battery isn''t faulty the inverter charger''s intelligent, multi-stage charging regime will ensure that it''s fully charged to its maximum capacity. The charging regime is three step fully automatic with pulse maintenance. Four charging programmes - 14.4V for batteries up to 225Ah; 14.7V for batteries up to 225Ah (cold mode); 5A/13.6V as a constant power supply/starter charging of very low charge batteries/memory saving function for disconnected batteries; 16V battery equalization for the recovery of partially sulphated batteries. Fully protected against short circuits and ± polarity inversion this charger is weatherproof (IP65), easy to use and wall mountable (fixings not supplied). Inverter chargers can be ONLY be used with lead-acid battery types as follows: wet, MF, AGM, GEL and lead calcium. Supplied with set of crocodile clips.
Specification:
Charging output ... 12V
Input-single phase ... 230V
Absorbed power ... 130W
Charge voltage ... 14.4-16.0V
Charging current ... 7A
Charging programme ... 4
Nominal capacity ... 14-225Ah
Insulation ... IP65
Dimensions ... 202 x 90 x 45mm
Weight ... 650g
|
|
|
Other products you may like to view:
|
|
See more from our 'Battery Chargers / Starters' section
|
 Enquire about this item  Add To Favourites 
Tell a Friend
|
|
|
|
|
|
Internet shopping sites created by Dimestream ©2012