Drills > Diamond Core Bits > DIAMOND CORE BIT

DIAMOND CORE BIT

This tool is from our Diamond Core Bits category
 
Drills : Diamond Core Bits : DIAMOND CORE BIT
DIAMOND CORE BIT - 12966      
(43709) DRAPER 28 x 300MM DIAMOND CORE BIT £33.77£20.18
(43710) DRAPER 38 x 150MM DIAMOND CORE BIT £39.96£23.88
(43711) DRAPER 52 x 150MM DIAMOND CORE BIT £50.83£30.37
(43712) DRAPER 78 x 150MM DIAMOND CORE BIT £58.51£34.96
(43713) DRAPER 107 x 150MM DIAMOND CORE BIT £73.75£42.17
(43714) DRAPER 117 x 150MM DIAMOND CORE BIT £76.90£43.98
(43715) DRAPER 127 x 150MM DIAMOND CORE BIT £81.74£46.75
(43716) DRAPER 152 x 150MM DIAMOND CORE BIT £122.88£70.28
DIAMOND CORE BIT
Manufactured from good quality steel with sintered diamond segment. For cutting holes for pipe and conduit. Thread 1/2" BSP. Carton packed.
Warning: If these bits are used in an SDS+ hammer drill, it must have an electronic safety clutch and only be used in rotary mode.


See more from our 'Diamond Core Bits' section

Enquire Enquire about this item      Add to Favourites Add To Favourites      Tell a friend Tell a Friend

Drills

Out new range of diamond core bits are the fastest way to cut through brick, breeze blocks, asphalt, limestone, paving slabs etc. The core can be removed in one piece with the minimum of remedial work required by the bricklayer or plasterer. Also less mess to clean up! Teh bits must be used in conjunction with an arbor and guide rods.
Diamond Core Bits

 Go to Top of 'DIAMOND CORE BIT' Page