110L/min (max.) 230V SUBMERSIBLE DIRTY WATER PUMP WITH FLOAT SWITCH

This item is from our Submersible Water Pumps category

110L/min (max.) 230V SUBMERSIBLE DIRTY WATER PUMP WITH FLOAT SWITCH - 7999-54657

£81.98 (RRP: £144.60)

110L/min (max.) 230V SUBMERSIBLE DIRTY WATER PUMP WITH FLOAT SWITCH
Ideal for pumping out inspection pits, ditches and footings where suspended solids may be present, general irrigation and other similar applications. Ceramic shaft for long life, thermal overload protection and float switch which automatically turns pump off when water level has dropped. Supplied complete with 10M (approx.) cable and BS approved non-rewireable moulded plug and cable. Display carton.
Specification:
Maximum head height   ...   6M
Maximum output   ...   110L/min
Hose Height - Approx. Output   ...   4M - 54L/min
Maximum water temperature   ...   35°C
Maximum particle size   ...   30mm dia.
Output aperture   ...   32mm dia.

Enquire about this item

Add To Favourites

Tell a Friend

Miscellaneous

Our Draper submersible water pumps are suited for a wide range of pumping applications. Our huge discounts on these submersible pumps will be hard to beat. Backed up by Abbey's commitment to providing you with the best service, you are on to a winner with these submersible pumps.

Submersible Water Pumps

Go to Top of '110L/min (max.) 230V SUBMERSIBLE DIRTY WATER PUMP WITH FLOAT SWITCH' Page