350mm 230V Two Wheel Draper Bandsaw

This tool is from our Draper Band Saws & Fret Saws category

350mm 230V Two Wheel Draper Bandsaw - 11250

(69053) BANDSAW STAND FOR 78264 TWO WHEEL BANDSAW (RRP £40.40)		£24.00
(78264) 350MM BANDSAW (RRP £531.44)		£377.00

350mm 230V Two Wheel Draper Bandsaw
Draper 350mm Two Wheel Bandsaw 240v 78264 Designed for workshop and industrial use. Facilities include a large cast iron table with tilt from 0-45° allowing straight cross cutting, ripping, mitre and bevel cutting. Supplied with aluminium mitre gauge, rip fence, push stick and dust extraction outlet. A saw stand is available separately - Stock No 69053. Supplied complete with a BS approved non-rewireable 3 pin moulded plug and cable. Display carton.
Specification: Maximum cutting height ... 200mm Throat depth ... 340mm Cutting speeds ... 2 (9.96 and 12.16 M/sec) Motor ... 750W Blade length ... 2480mm Table size ... 500 x 390mm Table tilt ... 0-45° Weight ... 78kg No-volt switch

Enquire about this item

Add To Favourites

Tell a Friend

Saws

A band-saw blade is a continuous loop of metal. Because the thrust of the blade is always downwards there is no risk of kickback. It can be used to cut curves and will cut thicker wood than the average circular saw. A fret saw uses an up and down motion, and with it's thin blade can be used for very accurate cutting of intricate shapes.

Draper Band Saws & Fret Saws

Go to Top of '350mm 230V Two Wheel Draper Bandsaw' Page