Saws > Draper Band Saws & Fret Saws > 500MM TRI-ROLLER STAND
500MM TRI-ROLLER STANDPower Tools Hand Tools  Sockets & spanners  Automotive  Hardware  Construction  Gardening 
homeabout uscontact us


500MM TRI-ROLLER STAND
This tool is from our Draper Band Saws & Fret Saws category
Saws : Draper Band Saws & Fret Saws : 500MM TRI-ROLLER STAND

500MM TRI-ROLLER STAND - 12387-89343

 
£53.05 (RRP: £121.75)
500MM TRI-ROLLER STAND
For use with bandsaws and planer/thicknesser where additional support of lengthy workpieces is required. Height can be adjusted by means of locating holes and six positional lock pins. Lock handles for added safety. Display carton.
Specification:
Height (minimum)      ...   730mm
Height (maximum)      ...   1000mm
Roller/bearing width      ...   500mm
Maximum supporting weight      ...   80kg


See more from our 'Draper Band Saws & Fret Saws' section
Enquire Enquire about this item      Add to Favourites Add To Favourites      Tell a friend Tell a Friend

See also:
Draper Circular Saws
Draper Jigsaws
Jigsaw Blades (Bayonet Type)
Jigsaw Blades (Universal Fitting)
Mitre Saws
Specialist Saws
Table Saws
Cutting Disks

Saws
A band-saw blade is a continuous loop of metal. Because the thrust of the blade is always downwards there is no risk of kickback. It can be used to cut curves and will cut thicker wood than the average circular saw. A fret saw uses an up and down motion, and with it's thin blade can be used for very accurate cutting of intricate shapes.
Draper Band Saws & Fret Saws

 Go to Top of '500MM TRI-ROLLER STAND' Page