code: 5729-53091
|
|
1 TONNE FOLDING ENGINE CRANE |
|
|
1 TONNE FOLDING ENGINE CRANE
Hydraulic engine crane with patented double piston pump. Four pre-set positions for lifting. Diagram on this page shows critical lifting heights and weights. Carton packed on pallet.
Specification:
Capacity ... 1 tonne (1000kg)
4 Positions ... @ 250kg; 500kg; 750kg; 1000kg
Frame height ... 1300mm
Frame length ... 1260mm
Frame width ... 950mm
Width of inside frame ... 750mm
Dist. between ctr. of rear wheels ... 600mm
Weight (approx.) ... 82kg
|
|
|
code: 5727-53095
|
|
150KG FLOOR TRANSMISSION JACK |
|
|
150KG FLOOR TRANSMISSION JACK
Suitable for lifting and lowering gearboxes and differential units. The scissor-type design provides precise movement allowing the user to accurately manoeuvre and fit the transmission assembly. Four heavy duty swivel castors provide flexibility of movement within the workplace. Carton packed.
Specification:
Capacity ... 150kg
Minimum height ... 170mm
Maximum height ... 570mm
Base width ... 420mm
Base length ... 410mm
Weight ... 17kg
Manufactured to EN1570 Specification.
|
|
|
code: 8680-63285
|
|
2 TONNE ENGINE CRANE WITH DOUBLE PISTON HYDRAULIC PUMP |
|
|
2 TONNE ENGINE CRANE WITH DOUBLE PISTON HYDRAULIC PUMP
|
|
|
code: 8058-56758
|
|
200KG TRANSMISSION CRADLE |
|
|
200KG TRANSMISSION CRADLE
For use with Draper Trolley Jack Stock No.37174. Carton packed.
Specification:
Load (max.) ... 200kg
Width ... 430mm
Length (min.) ... 267mm
Length (max.) ... 375mm
Height ... 350mm
Saddle tilt ... 30-10°
Weight ... 13.5kg
|
|
|
code: 5728-53094
|
|
300KG UNIVERSAL ENGINE OR GEARBOX SUPPORT |
|
|
300KG UNIVERSAL ENGINE OR GEARBOX SUPPORT
Allows work to be carried out on front wheel drive/transmission/drive shafts with engine suspended in-situ. Adjustable extension arms with locking feature. Neoprene support pads and adjustable screw. Carton packed.
Specification:
Capacity ... 300kg
Maximum extended width ... 1550mm (approx.)
Minimum width ... 1100mm (approx.)
Screw depth ... 300mm
|
|
|
code: 5730-53092
|
|
450KG ENGINE OR TRANSMISSION STAND |
|
|
450KG ENGINE OR TRANSMISSION STAND
This stand will accept a wide variety of engines and transmissions. The swivelling head (360°) gives accessibility to all parts of the engine. Fully adjustable mounting arms. The two front castors of the ‘HÕ frame base allow the stand to be moved around the workplace. Carton packed.
Specification:
Capacity ... 450kg
Width Front ... 400mm
Rear ... 800mm
Overall length ... 800mm
Height ... 910mm
Weight ... 21kg
|
|
|
code: 9072-61033
|
|
500KG CAPACITY ENGINE OR GEARBOX SUPPORT |
|
|
500KG CAPACITY ENGINE OR GEARBOX SUPPORT
Allows work to be carried out on front wheel drive/transmission/drive shafts with engine suspended in-situ. Adjustable extension arms with locking feature. Neoprene support pads and adjustable screws. Carton packed.
Specification:
Capacity ... 500kg
Maximum extended width ... 1550mm (approx.)
Minimum width ... 1100mm (approx.)
Screw depth ... 300mm
|
|
|
code: 8056-56730
|
|
500KG LOAD LEVELLER FOR ENGINE CRANE |
|
|
500KG LOAD LEVELLER FOR ENGINE CRANE
Suitable for levelling off centre loads quickly and easily. For use with Draper Stock No.53091 and 63285 Engine Cranes and other manufacturers similar cranes. Carton packed.
|
|
|
code: 8065-56731
|
|
600KG VERTICAL TRANSMISSION JACK |
|
|
600KG VERTICAL TRANSMISSION JACK
For use in the garage workshop. This model features high speed lift foot pedal. Hand operated precision release incorporating overload safety valve, large diameter wheels for easy manoeuvrability. Carton packed.
Specification:
Capacity ... 600kg
Stroke ... 700mm
Height (min) ... 1175mm
Height (max.) ... 1985mm
Base width ... 560mm
Base length ... 570mm
Weight ... 39kg
Manufactured to EN 1494 Specifications.
|
|
|
code: 8168-59077
|
|
ENGINE CRANE CHAIN 450KG MAXIMUM LOAD |
|
|
ENGINE CRANE CHAIN 450KG MAXIMUM LOAD
For use with Draper Stock No.53091 and 63285 Engine Cranes and other manufacturers similar cranes.
|
|
|