Hand / Inspection Lamps

Portable 13W fluorescent bulb in durable plastic casing. Hook end for hanging in engine bays, workshops and garages. Low power consumption. 5m cable length.

8W fluorescent bulb in durable plastic casing. Hook end for hanging in engine bays, workshops and garages. Powered from any 12V source. Low power consumption.

Portable 8W fluorescent bulb in durable plastic casing. Hook end for hanging in engine bays, workshops and garages. Low power consumption. 5m cable length.

Portable LED work light that can be plugged into a vehicle lighter socket to provide the equivalent illumination of a 40W incandescent bulb. Enclosed safety switch. Low power consumption. Overall length 410mm. 5m cable length.

Extra bright and durable LEDs equivalent to a 40W incandescent bulb. Lasts up to 8 hours when fully charged. Enclosed safety switch. Supplied with mains charger and 12V in-car charger.

1 million candle power torch with 12V plug to fit cigarette lighter socket. 25W halogen lamp. Trigger action with lock-on button.

120 LED Rechargeable Under bonnet Magnetic Inspection Lamp
Manufactured with magnetic swivel end caps enabling the lamp to be attached to the metal surfaces, also fitted with a under bonnet hanger for attaching to car bonnets. Lamp unit can swivel 90° in its holder and has a 60 LED function for longer battery life. Uses Ni-MH integral battery with a five hour (max.) charging time. Supplied with BS approved 3 pin 230V charger.

12V HEAVY DUTY HANDLAMP WITH MAINS ADAPTOR
Expert Quality, with heavy duty on/off switch, swivelling steel clamp, steel reflector, nitrile seal and domed polycarbonate lens and impact-resistant rubber handle. Supplied with a 24W bulb, approx. 7.25M of heavy duty cable, 230V AC mains adaptor with a 3 pin plug. Display carton.
Manufactured to BS EN 60598-1:2000

12V HEAVY DUTY HANDLAMP WITH ON/OFF SWITCH
Expert Quality, with on/off switch, swivelling steel clamp, steel reflector, nitrile seal and domed polycarbonate lens and heat-resistant ABS handle with easy access for rewiring. Supplied with a 24W bulb and approx. 7.25M of heavy duty cable with stripped ends so user can select clips or transformer for power supply. Can be used with Draper 12V/24W Handlamp Mains Adaptor Stock No.61306 or Draper Twin Outlet 12V/50W Handlamp Transformer Stock No. 61321. Packed in polythene bag with header card.
Manufactured to BS EN 60598-1:2000

12V QUARTZ HALOGEN HAND LAMP
Halogen spotlight with 110mm diameter lens for general applications in and around the car, boat and caravan etc. Supplied with 1M (unstretched) of flexible cable and vehicle cigarette lighter-type plug. Can be used with Draper Power Pack Stock No. 54723. Display carton.

21 LED Worklight with Timer (4 X AAA Batteries)
Handy 21 LED with increasing/decreasing luminance adjuster and timer allowing for 15, 30 and 60 minute lighting periods. Soft grip finish and useful hanging loop for hands free usage. Uses 4 x AAA batteries (sold separately).

230V INSPECTION LAMP
Incorporates a reflective head, useful hang up hook and protective cage around bulb. Maximum bulb size 60W Edison screw (not supplied). Supplied with 6M (approx.) cable and approved plug. Display carton.
The bulb used in this lamp MUST not exceed 60W.

30 LED SOFT GRIP RECHARGEABLE INSPECTION LAMP
Expert Quality, with clear polycarbonate lens and soft grip handle. Rechargeable 3.7V Li-ion battery pack within the handle. Useful swiveling hang-up hook at opposite end. Gives up to three hours continuous working time between charges. Maximum charging time six hours. 355mm in length. Charged by direct connection or by removing the battery and placing in the charger.

36 LED Rechargeable Magnetic Telescopic Inspection Lamp
Twin function allows telescopic unit to be used in torch or flood light mode. Constructed with magnetic base and integrated rechargeable battery. Gives up to 10 hours continuous working time between charges with a maximum four hour charging time. Supplied with BS approved 3 pin 230V charger.

37 LED Rechargeable Magnetic Inspection Lamp
Manufactured from heavy duty plastic with swivel joint handle enabling the light to be focused in a variety of directions. Can be used as a torch and flood light, fitted with hang up hook. Supplied with 240V and 12V chargers. Magnetic back and base allow hands free use.

60 LED INSPECTION LAMP
Heavy duty plastic with useful hang up hook. Gives up to five hours continuous working time between charges. Maximum charging time three hours. Supplied with BS approved 3 pin 230V charger and a 12V DC charger with vehicle cigarette lighter plug.

60 LED SOFT GRIP RECHARGEABLE INSPECTION LAMP
Expert Quality, with clear polycarbonate lens and soft grip handle. Rechargeable 7.4V Li-ion battery pack within the handle. Useful swiveling hang-up hook at opposite end. Gives up to three hours continuous working time between charges. Maximum charging time six hours. 450mm in length.Charged by direct connection or by removing the battery and placing in the charger dock.

60 LED WORKLIGHT (6 x AAA BATTERIES)
60 LED with increasing/decreasing luminance adjuster. Complete with two strong magnets and two useful hanging hooks for hands free use. Lumen levels 10,000 - 13,000 MCD''''s. Uses 6 x AAA batteries (supplied).

Expert 30 LED Rechargeable Magnetic Inspection Lamp
Expert Quality, manufactured from heavy duty plastic with swivel joint enabling the light to be focused in any direction, magnetic back and base, rubber bumper preventing damage and hang up hook. Gives up to 18 hours continuous working time between charges - 6 LED torch and five hours - 24 LED floodlight. Uses 3.7V Li-ion internal battery with five hour charging time (approx.). Supplied with BS approved 3 pin 230V charger.

HEAD LAMP WITH ADJUSTABLE STRAPS
Expert Quality, with adjustable head positioning and straps with foam pad to prevent chafing to the forehead. Suitable for hands-free work in dark areas. Water- resistant. Dual settings - has four LED bulbs for half power and eight for maximum illumination. Uses four AA size batteries (sold separately). Display carton.

HEAD LAMP WITH ADJUSTABLE STRAPS AND ADJUSTABLE RATCHET HEAD POSITION
Lamp with adjustable ratchet head positioning and straps with foam pad to prevent chafing to the forehead. Suitable for hands-free work in dark areas, including underwater use. The krypton bulb is 70% brighter than a conventional bulb. Uses four AA size batteries (sold separately). Display carton.

MAGNETIC 27 LED INSPECTION LAMP
Expert Quality, compact design, manufactured from heavy duty plastic with magnetic strip the on back, rubber bumper to prevent damage and hang up hook. Gives up to five hours continuous working time between charges. Maximum charging time three hours. 320mm in length. Supplied with BS approved 3 pin 230V charger.

RECHARGEABLE 36 LED WORKLIGHT
Expert Quality, heavy duty plastic with useful hang up hook. Gives up to three hours continuous working time between charges. Maximum charging time six hours. Supplied with BS approved 3 pin 230V charger and a 12V DC charger with vehicle cigarette lighter plug.