MIG Welding equipment

Welders - MIG Welding equipment (22 tools)
Abbey Power Tools stock a variety of MIG welding equipment, suitable for use by the hobbyist through to the professional welder. Note that the supply current must exceed the maximum amperage requirement of each machine.
(You can select other pages from the menu on the left, or click a tab above to change section.)
Scroll down to see all the ' MIG/TIG Welders ' tools on this page.
view:  
Abbey Silverline Gasless Turbo Mig 120A 55-120A

code: TS-427677
Abbey Silverline Gasless Turbo Mig 120A 55-120A
£200.81
Offers portability combined with stable and reliable performance. Wire feed motor with precision feed and fine screw adjustment. Uses 0.9mm flux cored wire and during the welding process the flux melts and protects the weld. No gas is required to shield the weld pool making this an ideal machine for outdoor use.
Abbey Silverline Gasless Turbo Mig 90A 50-90A

code: TS-282562
Abbey Silverline Gasless Turbo Mig 90A 50-90A
£164.42
Moving coil transformer offers stepless regulation of current with thermal and overload protection. Fan cooled for high efficiency and compact for portability. Supplied with earth cable, electrode holder, chipping hammer/wire brush and welding mask.
100A 230V Arc/Tig Inverter Welder Kit

code: 15508-19264
100A 230V Arc/Tig Inverter Welder Kit
Draper INV105
£176.81
100A 230V Arc/Tig Inverter Welder Kit
Compact, portable machine for TIG and MMA welding.
Features:
•   DC scratch start
•   Hot start
•   Anti-stick device
•   Thermostatic control
•   Fan assisted
•   Carrying strap
Supplied with electrode holder, earth lead, welding brush, face mask and cable. Carton packed.
Specification:
Input current   ...   16A
Output amperage range   ...   10-100A
Amps at 60% duty cycle   ...   57A
Electrode size   ...   1.6-3.0mm
Open circuit voltage   ...   78V
Dimensions   ...   215 x 360 x 262mm
Weight   ...   3.2kg
120A 230V GAS/GASLESS TURBO MIG WELDER

code: 15282-5565
120A 230V GAS/GASLESS TURBO MIG WELDER
Draper MW123AT
£526.01
120A 230V GAS/GASLESS TURBO MIG WELDER
Expert Quality, uses both solid or filler wire with a flux core. During the weld process the flux melts and protects the weld, therefore no gas is required to shield the weld pool, making it ideal for use outdoors in windy conditions.
Features:
•   Non-live direct fit safety torch
•   Four stage power setting
•   Variable wire speed control
•   Thermal overload protection
•   Earth clamp
•   Supplied with spool of 0.9mm flux cored wire (for mild steel)
Carton packed.
Specification:
Phase   ...   Single
Input current   ...   16A
Output amperage range   ...   35 - 120A
Amperage at 35% duty   ...   70A
No load voltage   ...   30V
Wire sizes
   mild steel   ...   0.6 - 0.8mm
   stainless steel   ...   0.8mm
   aluminium   ...   0.8mm
   flux cored   ...   0.9mm
Wire spool capacity   ...   up to 5kg
Dimensions   ...   230 x 420 x 380mm
Weight   ...   23kg

Regulator supplied separately
120A 230V GAS/GASLESS TURBO MIG WELDER

code: 15355-11973
120A 230V GAS/GASLESS TURBO MIG WELDER
Draper MWD121AT
£337.18
120A 230V GAS/GASLESS TURBO MIG WELDER
Uses both solid or filler wire with a flux core. During the weld process the flux melts and protects the weld, therefore no gas is required to shield the weld pool, making it ideal for use outdoors in windy conditions.
Features:
•   Non-live direct fit safety torch
•   Four stage power setting
•   Variable wire speed control
•   Thermal overload protection
•   Earth clamp
•   Supplied with face mask and combined chipping hammer/wire brush
Fitted with cable and approved plug. Carton packed.
Specification:
Input current   ...   13A
Output amperage range   ...   40 - 120A
Amperage at 35% duty   ...   65A
No load voltage   ...   21-36V
Filler wire sizes   ...   0.6 - 1.0mm
Dimensions   ...   525 x 289 x 410mm
Weight   ...   25.6kg

Regulator supplied separately
125A 230V MMA/TIG INVERTER WELDER KIT

code: 15291-5575
125A 230V MMA/TIG INVERTER WELDER KIT
Draper INV133
£335.86
125A 230V MMA/TIG INVERTER WELDER KIT
Expert Quality, compact, portable machine for DC TIG and MMA welding.
Features
•   DC scratch start
•   Hot start function
•   Anti-stick device
•   Thermostatic control
•   Fan assisted
•   Carrying strap and handle
Supplied with electrode holder and earth lead, face mask and welding brush. Cable and carrying case. Carton packed.
Specification:
Input current   ...   16A
Output amperage range   ...   5-125A
Duty cycle at 60%   ...   115A
Electrode size   ...   1.6-3.2mm
Open Circuit voltage   ...   62V
Dimensions   ...   275 x 130 x 170mm
Weight   ...   3.5kg
140A 230V Arc/Tig Inverter Welder Kit

code: 15509-19265
140A 230V Arc/Tig Inverter Welder Kit
Draper INV145
£216.05
140A 230V Arc/Tig Inverter Welder Kit
Compact, portable machine for TIG and MMA welding.
Features:
•   DC scratch start
•   Hot start
•   Anti-stick device
•   Thermostatic control
•   Fan assisted
•   Carrying strap
Supplied with electrode holder, earth lead, welding brush, face mask and cable. Carton packed.
Specification:
Input current   ...   32A
Output amperage range   ...   10-140A
Amps at 60% duty cycle   ...   85A
Electrode size   ...   1.6-3.2mm
Open circuit voltage   ...   78V
Dimensions   ...   215 x 360 x 262mm
Weight   ...   4.2kg
145A 230V TURBO MIG WELDER

code: 13269-43948
145A 230V TURBO MIG WELDER
Draper MW142AT
£641.45
145A 230V TURBO MIG WELDER
Expert Quality, uses both solid or filler wire with a flux core. During the weld process the flux melts and protects the weld, therefore no gas is required to shield the weld pool. Features:
•   Non-live direct fit safety torch
•   Four stage power setting
•   Variable wire speed control
•   Thermal overload protection
•   Earth clamp
•   Polarity switch
•   0.9/1.2mm and 0.6 wire feeder rollers
•   Up to 5kg wire spool capacity
Supplied with wheel kit, spool of 0.9mm flux cored wire and supports for re-useable gas bottles. Carton packed.
Specification:
Rated max. supply current   ...   21.2A
Rated eff. supply current   ...   8.5A
Input current   ...   16A
Output amperage range   ...   30 - 145A
Amperage at 60% duty   ...   55A
No load voltage   ...   30V
Wire sizes
   mild steel   ...   0.6 - 0.8mm
   stainless steel   ...   0.8mm
   aluminium   ...   0.8 - 1.0mm
   flux cored   ...   0.9mm
Wire spool capacity   ...   up to 5kg
Dimensions   ...   450 x 610 x 450mm
Weight   ...   30kg

Regulator supplied separately
150A 230V MMA/TIG INVERTER WELDER KIT

code: 15292-5574
150A 230V MMA/TIG INVERTER WELDER KIT
Draper INV153
£391.13
150A 230V MMA/TIG INVERTER WELDER KIT
Expert Quality, compact, portable machine for DC TIG and MMA welding.
Features:
•   DC scratch start
•   Anti-stick device
•   Hot start function
•   Thermostatic control
•   Fan assisted cooling
•   Carrying strap and handle
Supplied with electrode holder, earth lead, face mask and welding brush, cable and carrying case. Carton packed.
Specification:
Input current   ...   16A
Output amperage range   ...   5-150A   
Amps at 40% duty cycle   ...   150A   
Electrode size   ...   1.6-4.0mm   
Open Circuit voltage   ...   75V   
Dimensions   ...   275 x 130 x 170mm   
Weight   ...   3.8kg
150A 230V TURBO MIG WELDER

code: 13271-43950
150A 230V TURBO MIG WELDER
Draper MW162AT
£731.62
150A 230V TURBO MIG WELDER
Features:
•   Expert Quality
•   Non-live direct fit safety torch
•   Six stage power setting
•   Variable wire speed control
•   Thermal overload protection
•   Earth clamp
•   Polarity switch
•   0.9/1.2mm and 0.6 wire feeder rollers
•   Up to 5kg wire spool capacity
Supplied with wheel kit, spool of 0.9mm flux cored wire and supports for re-useable gas bottles. Carton packed.
Specification:
Rated max. supply current   ...   25A
Rated eff. supply current   ...   7.5A
Input current   ...   16A
Output amperage range   ...   30 - 160A
Amperage at 60% duty   ...   75A
No load voltage   ...   20 - 34V
Wire sizes
   mild steel   ...   0.6 - 0.8mm
   stainless steel   ...   0.8mm
   aluminium   ...   0.8 - 1.0mm
   Flux cored   ...   0.9mm
Wire spool capacity   ...   up to 5kg
Dimensions   ...   450 x 610 x 450mm
Weight   ...   31.5kg

Regulator supplied separately
160A 230V GAS/GASLESS TURBO MIG WELDER

code: 15357-12018
160A 230V GAS/GASLESS TURBO MIG WELDER
Draper MWD170AT
£472.03
160A 230V GAS/GASLESS TURBO MIG WELDER
Uses both solid or filler wire with a flux core. During the weld process the flux melts and protects the weld, therefore no gas is required to shield the weld pool, making it ideal for use outdoors in windy conditions.
Features:
•   Non-live direct fit safety torch
•   Four stage power setting
•   Variable wire speed control
•   Thermal overload protection
•   Earth clamp
•   Securing clips at rear to accommodate gas bottles
•   Wheels for ease of moving around work locations
•   Supplied with face mask and combined chipping hammer/wire brush
Carton packed.
Specification:
Phase   ...   Single
Input current   ...   16A
Output amperage range   ...   40 - 160A
Amperage at 20% duty   ...   120A
No load voltage   ...   23-38V
Filler wire sizes   ...   0.6 - 1.2mm
Dimensions   ...   610 x 370 x 450mm
Weight   ...   31kg

Regulator supplied separately
165A 230V MMA/TIG INVERTER WELDER KIT

code: 15293-5573
165A 230V MMA/TIG INVERTER WELDER KIT
Draper INV165
£434.28
165A 230V MMA/TIG INVERTER WELDER KIT
Expert Quality, compact, portable machine for DC, TIG and MMA welding.
Features:
•   DC scratch start
•   Anti-stick device
•   Thermostatic control
•   Fan assisted
•   Carrying strap and handle
Supplied with electrode holder, earth lead, face mask, welding brush, cable and carrying case. Carton packed.
Specification:
Input current   ...   16A
Output amperage range   ...   5-165A
Amps at 60% duty cycle   ...   120A
Electrode size   ...   1.6-4.0mm
Open Circuit voltage   ...   75V
Dimensions   ...   320 x 130 x 170mm
Weight   ...   4.0kg
180A 230V GAS/GASLESS MIG WELDER

code: 15358-12019
180A 230V GAS/GASLESS MIG WELDER
Draper MWD210AT
£505.78
180A 230V GAS/GASLESS MIG WELDER
Uses both solid or filler wire with a flux core. During the weld process the flux melts and protects the weld, therefore no gas is required to shield the weld pool, making it ideal for use outdoors in windy conditions.
Features:
•   Non-live direct fit safety torch
•   Four stage power setting
•   Variable wire speed control
•   Thermal overload protection
•   Earth clamp
•   Securing clips at rear to accommodate gas bottles
•   Wheels for ease of moving around work locations
•   Supplied with face mask and combined chipping hammer/wire brush
Carton packed.
Specification:
Input current   ...   16A
Output amperage range   ...   40 - 180A
Amperage at 35% duty   ...   100A
No load voltage   ...   23-38V
Filler wire sizes   ...   0.6 - 1.2mm
Dimensions   ...   610 x 370 x 450mm
Weight   ...   31kg

Regulator supplied separately
200A 230V TIG HF WELDER

code: 15286
200A 230V TIG HF WELDER
Draper TIG200H
(05579) Expert 200A 230V TIG HF Welder£1,495.85
(06915) Tig Torch for Expert 200A 230V TIG Hf Welder 05579£268.39
200A 230V TIG HF WELDER
Features:
•   Expert Quality
•   Microprocessor-controlled inverter technology
•   High frequency start function
•   TIG DC welding
•   Slope down TIG function
•   Complete with TIG torch and earth clamp
•   Digital display
•   High frequency start function
Specification:
Phase   ...   Single
Rated power   ...   5-7kW
Input current   ...   32A
Welding current range   ...   5-200A
Tungstens   ...   1.6 - 3.2mm
Duty cycle   ...   60% - 165A
Dimensions   ...   400 x 160 x 260mm
Weight   ...   7.8kg
200A 230V TURBO MIG WELDER

code: 15283-5566
200A 230V TURBO MIG WELDER
Draper MW183AT PRO
£1,314.96
200A 230V TURBO MIG WELDER
Features:
•   Expert Quality
•   Euro torch connector
•   Six stage power setting
•   Variable wire speed control
•   Thermal overload protection
•   Earth clamp
•   0.6/0.8mm wire feed roller
Supplied with wheel kit and swivel joint Euro fit welding torch. Carton packed on pallet.
Specification:
Phase   ...   Single
Input current   ...   32A
Output amperage range   ...   35 - 200A
Amperage at 60% duty   ...   100A
Welding current settings   ...   6
No load voltage   ...   33V
Wire sizes
   mild steel   ...   0.6 - 1.0mm
   stainless steel   ...   0.8mm
   aluminium   ...   0.8 - 1.0mm
Dimensions   ...   410 x 710 x 540mm
Weight   ...   39kg

Regulator supplied separately
240A 230V GAS TURBO MIG WELDER

code: 15284-5568
240A 230V GAS TURBO MIG WELDER
Draper MW184AT PRO
£1,449.82
240A 230V GAS TURBO MIG WELDER
Features:
•   Expert Quality
•   Euro torch connector
•   Adjustable burnback control
•   Spot welding timer for precise spot welds
•   Six stage power setting
•   Variable wire speed control
•   Thermal overload protection
•   Earth clamp
•   0.6/0.8mm wire feed roller
Supplied with:wheel kit and reinforced gas bottle support. Carton packed on pallet.
Specification:
Phase   ...   Single
Input current   ...   32A
Output amperage range   ...   30 - 240A
Amperage at 60% duty   ...   125A
Welding current settings   ...   6
No load voltage   ...   39V
Wire sizes
   mild steel   ...   0.6 - 1.0mm
   stainless steel   ...   0.8 - 1.0mm
   aluminium   ...   0.8 - 1.0mm
Dimensions   ...   505 x 840 x 765mm
Weight   ...   57kg

Regulator supplied separately
300A 230V TURBO MIG WELDER

code: 13272-43952
300A 230V TURBO MIG WELDER
Draper MW302AT PRO
£2,740.25
300A 230V TURBO MIG WELDER
Features:
•   Expert Quality
•   Euro torch connector
•   Twelve stage power setting
•   Variable wire speed control
•   Thermal overload protection
•   Spot weld timer, burnback, soft start, 2T and 4T modes
•   Earth clamp
•   0.6/0.8mm and 1.0/1.2mm wire feed rollers
•   Reinforced bottle holder
•   15kg wire spool capacity
Supplied with: wheel kit, gas bottle holder and chain restraints, 1.5M of gas hose, swivel joint Euro fit welding torch and earth clamp. Carton packed on pallet.
Specification:
Rated max. supply current   ...   42A
Rated eff. supply current   ...   21.5A
Input current   ...   16A
Output amperage range   ...   30 - 300A
Amperage at 60% duty   ...   150A
Open circuit voltage   ...   18.5 - 45V
Wire sizes
   mild steel   ...   0.6 - 1.2mm
   stainless steel   ...   0.8 - 1.2mm
   aluminium   ...   0.8 - 1.2mm
Max. welding thickness   ...   10mm - mild steel
Wire spool capacity   ...   up to 15kg
Dimensions   ...   520 x 900 x 1050mm
Weight   ...   90kg

Regulator supplied separately
90A 230V GAS/GASLESS TURBO MIG WELDER

code: 15354-11972
90A 230V GAS/GASLESS TURBO MIG WELDER
Draper MWD100AT
£283.22
90A 230V GAS/GASLESS TURBO MIG WELDER
Uses both solid or filler wire with a flux core. During the weld process the flux melts and protects the weld, therefore no gas is required to shield the weld pool, making it ideal for use outdoors in windy conditions.
Features:
•   Non-live direct fit safety torch
•   Four stage power setting
•   Variable wire speed control
•   Thermal overload protection
•   Earth clamp
•   Supplied with face mask and combined chipping hammer/wire brush. Fitted with cable and approved plug. Carton packed..
Specification:
Input current   ...   13A
Output amperage range   ...   35 - 90A
Amperage at 35% duty   ...   50A
No load voltage   ...   21-36V
Filler wire sizes   ...   0.6 - 0.8mm
Dimensions   ...   525 x 289 x 410mm
Weight   ...   23.5kg

Regulator supplied separately
Expert 80A 230V Arc/Tig Inverter Welder

code: 15054-5194
Expert 80A 230V Arc/Tig Inverter Welder
Draper INV80D
£269.09
Expert 80A 230V Arc/Tig Inverter Welder
Expert Quality, compact, portable machine for TIG and MMA welding. Features:
•   DC scratch start
•   Hot start
•   Anti-stick device
•   Thermal overload protection
•   Fan assisted
•   Shoulder strap on machine Supplied with electrode holder, earth lead and welding brush. 2M (approx.) cable, approved plug and carrying case. Carton packed.
Specification:
Output amperage range   ...   5-80A
Input current   ...   13A
Amps at 68% duty cycle   ...   80A
Electrode size   ...   1.6-2.5mm
Open circuit voltage   ...   70V
Dimensions   ...   130 x 275 x 170mm
Weight   ...   2.5kg
130A 230V GASLESS MIG WELDER

code: 13267-43946
130A 230V GASLESS MIG WELDER
Draper MW132A
£340.68
130A 230V GASLESS MIG WELDER
Expert Quality, uses a filler wire with a flux core. During the weld process the flux melts and protects the weld, therefore no gas is required to shield the weld pool, making it ideal for use outdoors in windy conditions Features:
•   Live direct fit torch
•   Two stage power setting
•   Variable wire speed control
•   Thermal overload protection
•   Earth clamp
•   Accepts mini wire spools supplied with spool of 0.9mm dia. flux cored wire (for mild steel). Fitted with cable and approved plug. Carton packed.
Specification:
Rated max. supply current   ...   10A
Rated eff. supply current   ...   5A
Input current   ...   13A
Output amperage range   ...   90 - 130A
Amperage at 25% duty   ...   80A
No load voltage   ...   22V
Wire size
   flux cored   ...    0.9mm
Wire spool capacity   ...   up to 0.7kg
Dimensions   ...   170 x 330 x 330mm
Weight   ...   15kg

Regulator supplied separately
130A 230V TURBO ARC WELDER

code: 15297-5581
130A 230V TURBO ARC WELDER
Draper AW130T
£137.50
130A 230V TURBO ARC WELDER
Multi-purpose machine suitable for experienced and DIY users alike.
Features:
•   Continuous regulation of welding current
•   Thermal overload protection
•   Direct fit earth clamp and electrode holder.
Supplied with face mask and combined hammer/wire brush.
Specification:
Phase   ...   Single
Input current   ...   16A
Output amperage range   ...   55 - 130A
Electrode size   ...   2.0 - 3.2mm
No load voltage   ...   50V
Dimensions   ...   170 x 353 x 232mm
Weight   ...   18kg
140A 230V GAS/GASLESS TURBO MIG WELDER

code: 15356-12033
140A 230V GAS/GASLESS TURBO MIG WELDER
Draper MWD150AT
£418.10
140A 230V GAS/GASLESS TURBO MIG WELDER
Uses both solid or filler wire with a flux core. During the weld process the flux melts and protects the weld, therefore no gas is required to shield the weld pool, making it ideal for use outdoors in windy conditions.
Features:
•   Non-live direct fit safety torch
•   Four stage power setting
•   Variable wire speed control
•   Thermal overload protection
•   Earth clamp
•   Supplied with face mask and combined chipping hammer/wire brush
Fitted with cable and approved plug. Carton packed.
Specification:
Input current   ...   16A
Output amperage range   ...   40 - 140A
Amperage at 35% duty   ...   75A
No load voltage   ...   23-38V
Filler wire sizes   ...   0.6 - 1.2mm
Dimensions   ...   525 x 289 x 410mm
Weight   ...   25.6kg

Regulator supplied separately

 You are currently viewing
 Welders > MIG Welding equipment


See also:
ARC Welders
Welding Accessories

Would you like to receive email updates on our special internet offers? If so, please click here.

  Go to Top of 'MIG Welding equipment' page