code: TS-793749
|
|
Abbey Silverline 1/2" TCT Panel Door Bit Set 3pce 1/2"
|
|
|
|
Sharp TCT cutting edges. Strong hardened steel shanks. Includes 2 x 12.7mm rail and stile bits, and 1 x 12.7mm raised panel bit.
|
|
|
code: TS-763555
|
|
Abbey Silverline 1/2" TCT Router Bit Set 12pce 1/2"
|
|
|
|
High quality 1/2" hardened steel shanks with sharp TCT cutting edges. Twin cutting edge for smooth finish. Straight bits 12.7x6mm, 12.7x12mm, 12.7x16 mm; V-Groove Bit 12.7x12.7mm; Dovetail Bit 12.7x12.7mm; Chamfer Bit 12.7x32mm; Bearing Flush Trim Bit 12.7x12mm; Rounding Over Bits 12.7xR6.3mm and R9.5mm; Rounding Box Bit 12.7xR6.3mm; Cove Box Bit 12.7xR6.3mm; Roman Ogee Bit 12.7xR4mm
|
|
|
code: TS-580422
|
|
Abbey Silverline 1/2" TCT Router Bit Set 30pce 1/2"
|
|
|
|
With 1/2" shanks. Contents: Straight bits 5, 6, 8, 10, 12, 14, 16, 18 and 20mm; Dovetail: 12.7mm; V Groove: 9.5mm, 12.7mm, R6.3mm; Cove box: R3.2mm, R6.3mm; Classical: 12.7mm; Flush trim: 12.7mm; Chamfer 16mm, 32mm; Roman ogee R4mm; Rebater 28.6mm; Cove bit: R9.5mm; Rounding Over: R3.2mm, R6.3mm, R7.9mm, R9.5mm; Beading Cutter: R3.2mm, R6.3mm, R7.9mm, R9.5mm.
|
|
|
code: TS-792084
|
|
Abbey Silverline 1/4" TCT Router Bit Set 12pce 1/4"
|
|
|
|
1/4" shank router cutter set. Contents: Straight bits (6 x 20, 12 x 22, 16 x 20mm), Cove box cutter (9.5 x 12.7mm), Dovetail bit (11.5 x 12.7mm), Cove cutter (22 x 11.2mm), Flush trim cutter (12.7 x 12.7mm), V Groove cutter (12.7 x 11.5mm x 90°), Roman ogee cutter (25.4 x 11.7 x R4mm), Rounding over cutter (22 x 10.5 x R6.35mm), Ovolo cutter (28.6 x 15 x R9.5mm), Chamfer cutter (32 x 12.7mm x 45°).
|
|
|
code: TS-656577
|
|
Abbey Silverline 1/4" TCT Router Bit Set 24pce 1/4"
|
|
|
|
1/4" / 6.35mm shank TCT router bits. Includes: Mortice 12.7mm. Combi bevel 12.7mm. Dovetail 9.5 and 12.7mm. V Groove 12.7mm. Round nose R4.76/D9.5 and R6.35/D12.7mm. Chamfer 14 and 27mm. Panel pilot 16mm. Straight 6.35, 9.5, 12.7 and 19mm. Flush Trim 12.7mm. Rounding over R3.18/D19mm, R4.8/D22, R6.35/D25.4 and R9.5/D31. Cove R9.5/D22 and R6.35/D28.6mm. Roman Ogee R4/D30mm. Slot Cutter 31.8mm. Rebater 31.8mm. Hex key.
|
|
|
code: TS-868596
|
|
Abbey Silverline Biscuit Cutter
|
|
|
|
Sharp TCT cutting edges. Interchangeable bearings convert from No.10 to No.20 biscuit.
|
|
|
code: TS-675111
|
|
Abbey Silverline Cove Box Cutter 12.7 x 12.7mm
|
|
|
|
Twin flute tool for curved profile cuts, such as coves or part of rule joints. Tungsten carbide tipped. Manufactured to handle heavy workloads. Provides a smooth, accurate cut. 1/4" shank.
|
|
|
code: TS-993037
|
|
Abbey Silverline Cove Cutter
|
|
|
|
To produce a concave rounded edge on the workpiece.
|
|
|
code: TS-763576
|
|
Abbey Silverline Dovetail Cutter
|
|
|
|
To produce dovetail joints.
|
|
|
code: TS-794324
|
|
Abbey Silverline Flush Trim Cutter
|
|
|
|
Flush cutter for trimming hard laminates such as kitchen tops. Glue must be dry to prevent fouling. Ultra sharp TCT cutting edges. Twin fluted body for a smooth finish. Fits all 1/4" routers.
|
|
|
code: TS-245122
|
|
Abbey Silverline Guide Bush Set 10pce 5/16" - 3/4"
|
|
|
|
Suitable for use on most routers when using a universal plate. Bush sizes: 5/16", 3/8", 7/16", 1/2", 5/8", 51/64", 3/4". Includes adaptor plate and two knurled lock nuts.
|
|
|
code: TS-719769
|
|
Abbey Silverline Kitchen Router Bit Set 4pce 1/4" / 1/2"
|
|
|
|
Comprehensive pack for kitchen fitters. Contains 4 essential router bits: Straight bit 63 x 12.7mm; 2 x Straight bits 50 x 12.7mm with 1/2" shank; 1 x Flush trim bit 25.4 x 12.7mm with 1/4" shank.
|
|
|
code: TS-486939
|
|
Abbey Silverline Ogee Cutter 31 x 12.7 x 5mm
|
|
|
|
Use for bevelling timber in countertop and cabinet making production.
|
|
|
code: TS-245002
|
|
Abbey Silverline Rebate Cutter
|
|
|
|
For producing rebates, small tenon joints, lap joints and cabinet door cuts.
|
|
|
code: TS-371745
|
|
Abbey Silverline Roman Ogee Cutter 25.4 x 15.9 x 4mm
|
|
|
|
Tungsten carbide tipped. 1/2" shank. Cuts Roman Ogee pattern to edge of workpiece. Self-guiding cutter bearing prevents marking of material.
|
|
|
code: TS-264895
|
|
Abbey Silverline Router 1/2" 1500W
|
|
|
|
Electronic variable speed, soft start, adjustable plunge depth, parallel and circle guide. Lock-off button, spindle lock and spanner. Includes 1/2”, 1/4” and 8mm and 12mm collets. Base diameter 170mm. No load speed 6000-26000rpm.
|
|
|
code: TS-124799
|
|
Abbey Silverline Router 1/2" 2050W
|
|
|
|
Variable speed control and soft-start eliminates machine movement on start-up. Heavy duty blade, 50mm plunge depth with fine adjustment dial. Spindle lock for easy router bit fitting. Soft-grip handles. Includes parallel guide bar, roller guide, circle and template guide, 5 router cutters and spanner.
|
|
|
code: TS-832747
|
|
Abbey Silverline Straight Imperial Cutter
|
|
|
|
Straight cutter with sharp, durable tungsten carbide blade.
|
|
|
code: TS-677278
|
|
Abbey Silverline Straight Imperial Cutter 10 x 25mm
|
|
|
|
Straight cutter with durable tungsten carbide blade and twin flute for a clean finish.
|
|
|
code: TS-686140
|
|
Abbey Silverline Straight Imperial Cutter 14 x 25mm
|
|
|
|
Straight cutter with durable tungsten carbide blade and twin flute for a clean finish.
|
|
|
code: TS-367971
|
|
Abbey Silverline Straight Metric Cutter
|
|
|
|
Straight cutter with durable tungsten carbide blade and twin flute for a clean finish.
|
|
|
code: TS-790840
|
|
Abbey Silverline Straight Metric Cutter
|
|
|
|
Straight cutter with sharp, durable tungsten carbide blade. Twin flute for a clean finish.
|
|
|
code: TS-718108
|
|
Abbey Silverline Straight Metric Cutter 12 x 25mm
|
|
|
|
Straight cutter with durable tungsten carbide blade and twin flute for a clean finish.
|
|
|
code: TS-633631
|
|
Abbey Silverline Template Cutter
|
|
|
|
Sharp TCT cutting edges. For use with router templates or jigs. Twin fluted for smooth finish. Fits all 1/4" routers.
|
|
|
code: TS-675112
|
|
Abbey Silverline V Groove Cutter 12.7 x 10mm
|
|
|
|
Tungsten carbide tipped. 1/2" shank. Use to chamfer edge of materials or, to produce decorative cut on flat surface.
|
|
|
code: TS-633488
|
|
Abbey Silverline Worktop Jig 900mm
|
|
|
|
Cuts standard left and right hand joints, corner joints and peninsular joints in worktops up to 900mm width. Enables recess to be cut for worktop joint clamps. Use with a router and 30mm guide bush. Made from hardwearing laminated fibre board. Includes aligning pins and instructions.
|
|
|
code: TS-925837
|
|
Abbey Triton Compact Precision Plunge Router 1010W JOF001
|
|
|
|
Lightweight, compact router ideal for free-hand work. Automatic spindle lock for one-handed bit changes and above-the-table height winder for quick fine tuning of the depth setting. Supplied with straight bit and height adjustment winder. 1/2" and 12mm collet.
|
|
|
code: TS-330085
|
|
Abbey Triton Dual Mode Precision Plunge Router 1400W MOF001
|
|
|
|
Compact and powerful 1400W (2hp) motor, 8000 -21000rpm electronic speed maintenance under load. Quick-fit pins located in base for rapid fitment to mounting plate compatible with Triton router table. Easy-set, direct reading 3-stage turret for precise pre-set cut depths. Single dial switch from plunge to fixed-base router with rack and pinion height adjustment.
|
|
|
code: TS-330165
|
|
Abbey Triton Dual Mode Precision Plunge Router 2000W TRB001
|
|
|
|
Powerful 2000W electronically controlled motor. Single spanner ‘above table’ cutter changing. Automatic shaft lock and power lock-off during cutter change mode. Fast plunge depth adjustment with winder handle and fine depth adjustment with micro winder. Quick switching to conventional plunge mode. Removable plunge spring for easy lifting and adjustment. Effective dust port.
|
|
|
code: TS-330080
|
|
Abbey Triton Finger Jointer FJA300
|
|
|
|
Fits straight onto the Triton Router Table for easy, accurate and attractive box joints. The simple way to make perfect 1/4" and 1/2" box joints in any board thicknesses, from 3mm to 32mm. Cuts several joints at the same time. Use with Triton Router Table model RTA300.
|
|
|
code: TS-330100
|
|
Abbey Triton Precision Router Table RTA300
|
|
|
|
Versatile router table for use on Triton Workcentres and Router Stands. Accepts most 1/4" and 1/2" routers for shaping, planing, rebating, trenching, moulding and grooving. Large, rigid work table with sliding table insert with removable protractor. High-faced fence with micro adjusters and planing shims. Safety guard with dust extraction facility.
|
|
|
code: TS-330095
|
|
Abbey Triton Router Stand RSA300
|
|
|
|
Fitted with safety ON/OFF switch. Adjustable leg height for uneven ground. Suits all Triton Router Tables. Folds down for storage.
|
|
|
code: 12623-90088
|
|
1200W 230V VARIABLE SPEED ROUTER KIT WITH BITS
|
|
|
1200W 230V VARIABLE SPEED ROUTER KIT WITH BITS
Features:
• Spindle lock for easy bit change
• Fine height adjustment
• Parallel fence guide
• Circle/curved edge cutting attachment
• Dust extraction facility
• 6 piece router bit set Supplied with: parallel fence guide; 6mm, 1/4" and 8mm collets; six assorted router bits; circle/edge cutting attachment; 17mm template guide; base and spanner, 3M(approx.) cable and approved plug.
Specification:
Collets supplied ... 6mm, 1/4", 8mm
Speed (no load) ... 11,500 - 30,000r/min
Plunge stroke (no dust extraction) ... 0-50mm
Plunge stroke (dust extraction) ... 0-38mm
Weight ... 4.5kg
|
|
|
code: 11902-80002
|
|
1500W 230V VARIABLE SPEED ROUTER KIT
|
|
|
1500W 230V VARIABLE SPEED ROUTER KIT
Features:
• Spindle lock for easy bit change
• External changeable brushes
• Fine height adjustment
• Circle/curved edge cutting attachment
• Dust extraction facility Supplied with: carrying case; parallel fence guide; 1/4", 1/2" and 8mm collets; circle/edge cutting attachment; 21mm template follower; base and spanner, 3M(approx.) cable and approved plug.
Specification:
Collets supplied ... 1/4", 1/2", 8mm
Speed (no load) ... 11,500 - 22,000r/min
Plunge stroke (no dust extraction) ... 0-50mm
Plunge stroke (dust extraction) ... 0-44mm
Weight ... 4.5kg
Weight (machine only) ... 7kg
|
|
|
code: 12559-89993
|
|
4 PIECE EXTRA LONG ROUTER BIT SET
|
|
|
4 PIECE EXTRA LONG ROUTER BIT SET
1/4" and 1/2" shank extra long router bits with TCT heads especially for use with extra thickness laminate used by kitchen fitters. Supplied with hexagon key. Display packed in storage case.
Contents:
• 1 x Flush Twin Flute with bearing: 1/4" shank; 12.7 x 25mm long
• 2 x Flush Straight Twin Flute: 1/2" shank; 12.7 x 50mm long
• 1 x Flush Straight Twin Flute: 1/2" shank; 12.7 x 63mm long
|
|
|
code: 10824
|
|
Draper 12 PIECE ROUTER BIT SETS
|
|
|
Draper 12 PIECE ROUTER BIT SETS
Assortment of router bits with T.C.T. heads to suit most applications. Supplied in display case.
Contents:
• 3 x straight bits - 6, 12 and 16mm dia.
• 90° ‘VÕ grooving (or groove) bit
• dovetail bit 12.7mm dia.
• 45° chamfer bit
• bearing flush trim bit (or flush) - 12.7mm dia.
• 2 x rounding bits - R 6.3, R 9.5mm
• core box bit R 6.3mm
• cove bit R 6.3mm
• roman ogee bit R 4mm
• hexagon key
R = radius, all other measurements are diameters
|
|
|
code: 13331-45368
|
|
DRAPER EXPERT 1350W 230V COMBINATION ROUTER KIT
|
|
|
DRAPER EXPERT 1350W 230V COMBINATION ROUTER KIT
Features:
• Expert Quality
• Separate fixed and plunge bases
• Soft start motor
• Six variable speeds
• Spindle lock for easy bit change
• Fine height adjustment (plunge)
• Micro height adjustment (fixed)
• Parallel fence guide
• Dust extraction facility on both bases
• 3 integral LED work lights to aid working Supplied with: parallel fence guide; template guide adaptor; centring pin; dust extraction ports (plunge and fixed); chip protectors (plunge and fixed); guide bush kit (11.1, 16 and 30mm); trammel ; cast aluminium bases with polycarbonate sole plates; spanner, 3M (approx.) cable and approved plug.
Specification:
Collets supplied ... 1/4", 1/2"
Speed (no load) ... 12,500 - 25,000r/min
Plunge stroke (no dust extraction) ... 0-45mm
Plunge stroke (dust extraction) ... 0-55mm
Weight - plunge base ... 4.3kg
Weight - fixed base ... 3.6kg
Total weight (kit) ... 9.5kg
|
|
|
code: 11835
|
|
Draper ROUTER BIT
|
|
|
Draper ROUTER BIT
|
|
|
code: 11827-79206
|
|
EXPERT QUALITY 700MM WORKTOP JIG
|
|
|
|
EXPERT QUALITY 700MM WORKTOP JIG
Expert Quality, for use with routers. Suitable for cutting 400 to 700mm wide worktops; 22.5°, 45° and 90° mitres; 20, 40 and 100mm radius slots; 90° mitre joints; helps with chamfered cuts and Supplied with four nylon pegs. Manufactured from high grade laminate. Sold loose.
|
|
|