Draper Bench Drills

Drills - Draper Bench Drills (12 tools)
A drill press is for heavy-duty stationary drilling. The drilling head is mounted on a rigid metal column, that is either bolted or stands on the workbench or stands on the floor. You can feed the bit into the work steadily using the handle - it isn't necessary to use excessive force when using sharp drill bits. All Draper bench drills have a "No-Volt" release switch - if the power is turned off at the mains the drill switches off - no nasty surprises when the mains switch is turn on again.
(You can select other pages from the menu on the left, or click a tab above to change section.)
Scroll down to see all the ' Bench Drills ' tools on this page.
 
Abbey Silverline Drill Press 250mm 350W
code: TS-262212
Abbey Silverline Drill Press 250mm 350W
£73.55
5-speed belt drive. Chuck/spindle travel 0-50mm with gauge for accurate drilling. Strong cast base and machine table. 13mm keyed chuck capacity.
1 750W 230V BENCH MORTICER AND STAND
code: 14324-9896
1" 750W 230V BENCH MORTICER AND STAND
Draper BM25/AABM25
£897.12£588.87
1" 750W 230V BENCH MORTICER AND STAND
Powerful induction motor supports 1" mortice facility. Back, forth and lateral table movement allows for easy positioning of larger workpieces. Fully adjustable work clamps and depth stops allow for accurate morticing. Supplied with 5/8" chisel and bit, 19mm, 13/16" and 13/16" chisel bushes, 16mm chuck and key, work clamp, 2M(approx.) cable and approved plug. Display packed on pallet.
Specification:
Speed   ...   1400r/min
Chisel capacity   ...   25.4mm (1")
Chuck capacity   ...   16mm
Chisel stroke (max.)   ...   220mm
Workpiece height (max.)   ...   220mm (5/8" chisel)
Clamping height (max.)   ...   200mm
Chuck capacity   ...   16mm
Fence to chisel centre   ...   140mm
Table size   ...   400 x 150mm
Base size   ...   300 x 450mm
Weight (machine only)   ...   108kg

No-volt switch
1/2 370W 230V Bench Morticer
code: 16441-33651
1/2" 370W 230V Bench Morticer
Draper BM13C
£290.09£234.12
1/2" 370W 230V Bench Morticer
For general workshop use. Fully adjustable fence and workpiece holder. Powerful induction motor provides a morticing capacity of 1/2". Supplied with depth stop, work clamp, 3 piece chisel set (1/4", 3/8", 1/2"), chisel reducing adaptors, chuck and key. Display carton.
Specification:
Chisel capacity   ...   12.7mm(1/2")
Chuck capacity   ...   1/2"
Speed   ...   1400rpm
Max morticing depth   ...   76mm
Max clamping height   ...   90mm
Max. clamping height   ...   70mm
Table size   ...   150 x 340mm
Base size   ...   190 x 255mm
Fence to chisel centre   ...   84mm
Weight   ...   27kg

No-volt switch
12 Speed Industrial Pillar Drill (1100W)
code: 13022
12 Speed Industrial Pillar Drill (1100W)
Draper HD25/12ACF
(42642) 12 Speed Industrial Pillar Drill (1100W) £1,018.80£709.49
(45012) MT3 Geared Chuck £37.61£23.05

12 Speed Industrial Pillar Drill (1100W)


A heavy-duty industrial pillar drill fitted with a 12-speed pulley system and ultra powerful 1100W induction motor delivering fantastic torque. Each pillar drill is manufactured with an extra thick steel pillar, ultra powerful and reliable heavy-duty motor, MT3 chuck and a large heavyweight stabilising foot. These high quality features reinforce the robustness and superiority of this pillar drill making it ideal in industrial situations. The table height is controlled via a rack and pinion system with left-right adjustment. Supplied with a telescopic chuck guard and a front mounted NVR switch. All these characteristics produce a industrial pillar drill best suited for accurate drilling in both hard and soft materials within heavy-duty manufacturing and engineering environments.
Specification:
Drilling capacity   ...   25mm
Chuck capacity   ...   3-16mm
Collar diameter   ...   92mm
Spindle taper   ...   MT3
Speeds Speeds (r/min)   ...   12 (150-2700)
Swing   ...   432mm
Spindle travel   ...   120mm
Column diameter   ...   92mm
Table size   ...   345 x 345mm
Throat depth   ...   220mm
Base size   ...   580 x 375mm
Height   ...   1700mm
Weight   ...   138kg

VDE no-volt switch

 

16 Speed Bench Drill (450W)
code: 16949-38259
16 Speed Bench Drill (450W)
Draper GD16/16AD
£365.98£250.45
16 Speed Bench Drill (450W)
The 16-speed pulley system and powerful 450W induction motor supply fantastic torque. Each bench drill is manufactured with a steel pillar, heavy-duty motor, MT2 chuck and a large heavyweight stabilising foot; all these features reinforce the robustness and quality of the drill. The table height is controlled via a rack and pinion system with left-right adjustment. Supplied with a telescopic chuck guard and a front mounted NVR switch for added convenience and safety. All these characteristics produce a bench drill best suited for accurate drilling in both hard and soft materials. A great choice for the hobbyist’s or light industrial user.
Specification:
Drilling capacity   ...   16mm
Chuck capacity   ...   1.5-16mm
Spindle Taper   ...   MT2
Speeds (r/min)   ...   16 (210-3200)
Swing   ...   338mm
Spindle travel   ...   80mm
Column diameter   ...   70mm
Table size   ...   288 x 288mm
Throat depth   ...   169mm
Height   ...   990mm
Weight   ...   47kg

No-volt switch
16 Speed Floor Standing Drill (450W)
code: 16950
16 Speed Floor Standing Drill (450W)
Draper GD16/16ADF
(38260) 16 Speed Floor Standing Drill (450W) £428.40£306.50
(52937) MT2/16mm Geared Chuck £27.22£16.67
(52938) 60mm Chuck Guard for 38259 £28.54£17.49
16 Speed Floor Standing Drill (450W)
The 16-speed pulley system and powerful 450W induction motor supply fantastic torque. Each floor pillar drill is manufactured with a steel pillar, heavy-duty motor, MT2 chuck and a large heavyweight stabilising foot; all these features reinforce the robustness and quality of the drill. The table height is controlled via a rack and pinion system with left-right adjustment. Supplied with a telescopic chuck guard and a front mounted NVR switch for added convenience and safety. All these characteristics produce a floor standing drill best suited for accurate drilling in both hard and soft materials. A great choice for the hobbyist’s or light industrial user.
Specification:
Drilling capacity   ...   16mm
Chuck capacity   ...   1.5-16mm
Collar diameter   ...   86mm
Spindle taper   ...   MT2
Speeds (r/min)   ...   16 (210-3200)
Swing   ...   338mm
Spindle travel   ...   80mm
Column diameter   ...   70mm
Table size   ...   270 x 270mm
Throat depth   ...   169mm
Base size   ...   270 x 450m
Height   ...   1590mm
Weight   ...   63kg

VDE no-volt switch
370W 230V 5 SPEED FLOOR STANDING GENERAL WORKSHOP RADIAL DRILL
code: 13038-43377
370W 230V 5 SPEED FLOOR STANDING GENERAL WORKSHOP RADIAL DRILL
Draper GD16/5CFR
£551.86£383.12
370W 230V 5 SPEED FLOOR STANDING GENERAL WORKSHOP RADIAL DRILL
The five-speed pulley system and powerful 370W induction motor supply fantastic torque. Each drill is manufactured with a steel pillar, heavy-duty motor, MT2 chuck and a large heavyweight stabilising foot; all these features reinforce the robustness and quality of the drill. The table height is controlled via a rack and pinion system with left-right adjustment. Supplied with a telescopic chuck guard and a front mounted NVR switch for added convenience and safety. All these characteristics produce a floor standing drill best suited for accurate drilling in both hard and soft materials. A great choice if the hobbyist’s or light industrial user needs to save workbench space.
Specification:
Drilling capacity   ...   16mm
Chuck capacity   ...   3-16mm
Collar diameter   ...   60mm
Spindle taper   ...   MT2
Speeds (r/min)   ...   5 (460-2890)
Swing (radial)   ...   840mm
Horizontal arm travel   ...   320mm
Spindle travel   ...   80mm
Column diameter   ...   70mm
Table size   ...   260 x 260mm
Throat depth   ...   380mm
Base size   ...   420 x 250mm
Height   ...   1630mm
Weight   ...   65kg

VDE no-volt switch
5 Speed Bench Drill (450W)
code: 16948
5 Speed Bench Drill (450W)
Draper GD13/5D
(38256) 5 Speed Bench Drill (450W) £275.40£183.05
(52640) MT2/13mm Geared Chuck £24.62£15.09
(52669) 40mm Chuck Guard for 38256 £25.92£15.88
5 Speed Bench Drill (450W)
The five-speed pulley system and powerful 450W induction motor supply fantastic torque. Each bench drill is manufactured with a steel pillar, heavy-duty motor, 13mm capacity chuck and a large heavyweight stabilising foot; all these features reinforce the robustness of the drill. The round table height is controlled via a rack and pinion system with left-right adjustment. Supplied with a telescopic chuck guard and a front mounted NVR switch for added convenience and safety. All these characteristics produce a bench drill best suited for accurate drilling in both hard and soft materials. A great choice for hobbyist or light industrial workshops.
Specification:
Drilling capacity   ...   13mm
Chuck capacity   ...   1.5-13mm
Spindle Taper   ...   MT2
Speeds (r/min)   ...   5 (660-2500)
Swing   ...   252mm
Spindle travel   ...   60mm
Column diameter   ...   60mm
Table size   ...   220 x 220mm square
Throat depth   ...   126mm
Height   ...   820mm
Weight   ...   37kg

No-volt switch
5 Speed Hobby Bench Drill (350W)
code: 16947
5 Speed Hobby Bench Drill (350W)
Draper D13/5DA
(38255) 5 Speed Hobby Bench Drill (350W) £122.38£96.43
(52253) 13mm Chuck £24.62£15.09
(52254) 40mm Chuck Guard for 38255 £19.44£11.92

5 Speed Hobby Bench Drill (350W)


The five-speed pulley system and 350W motor supply provide a great bench drill for hobbyist’s. Each bench drill is manufactured with a steel pillar, heavy-duty motor, 13mm capacity chuck and a large heavyweight stabilising foot; all these features reinforce how well built the drill is. The table height is controlled via a rack and pinion system with left-right adjustment. Supplied with a telescopic chuck guard and a front mounted NVR switch for added convenience and safety.
Specification:
Drilling capacity   ...   13mm
Chuck capacity   ...   1.5-13mm
Collar diameter   ...   40mm
Speeds (r/min)   ...   5 (580-2650)
Swing   ...   208mm
Spindle travel   ...   50mm
Column diameter   ...   46mm
Table size   ...   158 x 162mm square
Throat depth   ...   104mm
Height   ...   580mm
Weight   ...   18kg

No-volt switch

 

650W 230V 16 SPEED FLOOR STANDING HEAVY DUTY DRILL
code: 13024-42641
650W 230V 16 SPEED FLOOR STANDING HEAVY DUTY DRILL
Draper HD19/16ACF
£658.80£496.58
650W 230V 16 SPEED FLOOR STANDING HEAVY DUTY DRILL
The heavy-duty pillar drill with 16-speed pulley system and powerful 650W induction motor supply fantastic torque. Each pillar drill is manufactured with a extra thick steel pillar, heavy-duty motor, MT2 chuck and a large heavyweight stabilising foot. All these features reinforce the robustness and quality of the pillar drill making it ideal in industrial situations. The table height is controlled via a rack and pinion system with left-right adjustment. Supplied with a telescopic chuck guard and a front mounted NVR switch. All these characteristics produce a pillar drill best suited for accurate drilling in both hard and soft materials within manufacturing and engineering environments.
Specification:
Drilling capacity   ...   19mm
Chuck capacity   ...   3-16mm
Collar diameter   ...   60mm
Spindle taper   ...   MT2
Speeds (r/min)   ...   16 (120-3000)
Swing   ...   356mm
Spindle travel   ...   80mm
Column diameter   ...   80mm
Table size   ...   290 x 290mm
Throat depth   ...   180mm
Base size   ...   460 x 275mm
Height   ...   1650mm
Weight   ...   98kg

VDE no-volt switch
650W 230V 16 SPEED HEAVY DUTY BENCH DRILL
code: 13023-42640
650W 230V 16 SPEED HEAVY DUTY BENCH DRILL
Draper HD19/16AC
£582.00£442.71
650W 230V 16 SPEED HEAVY DUTY BENCH DRILL
The heavy-duty 16-speed pulley system and powerful 650W induction motor supply fantastic torque. Each bench drill is manufactured with a extra thick steel pillar, heavy-duty motor, MT2 chuck and a large heavyweight stabilising foot. All these features reinforce the robustness and quality of the drill making it ideal in industrial situations. The table height is controlled via a rack and pinion system with left-right adjustment. Supplied with a telescopic chuck guard and a front mounted NVR switch. All these characteristics produce a bench drill best suited for accurate drilling in both hard and soft materials within manufacturing and engineering environments.
Specification:
Drilling capacity   ...   19mm
Chuck capacity   ...   3-16mm
Collar diameter   ...   60mm
Spindle taper   ...   MT2
Speeds (r/min)   ...   16 (120-3000)
Swing   ...   356mm
Spindle travel   ...   80mm
Column diameter   ...   80mm
Table size   ...   290 x 290mm
Throat depth   ...   180mm
Base size   ...   460 x 275mm
Height   ...   1000mm
Weight   ...   86kg

VDE no-volt switch
CHUCK GUARD
code: 6982
CHUCK GUARD
Draper YCG60
(65964) 60mm Chuck Guard £25.92£15.88
(65965) Chuck Guard for 63221, 63275, 65863 £25.92£15.88
CHUCK GUARD
 You are currently viewing
 Drills > Draper Bench Drills


Would you like to receive email updates on our special internet offers? If so, please click here.

  Go to Top of 'Draper Bench Drills' page