Item code: 5547-52321
|
|
10 PIECE SLIDE HAMMER KIT |
|
|
10 PIECE SLIDE HAMMER KIT
Packed in blow mould storage carrying case with display sleeve.
Contents:
• 2.3kg slide hammer with 470mm shaft
• large flat hook
• small flat hook
• large round hook
• small round hook
• screwholder
• self-tapping screw
• tapered screw
• adaptor
|
|
|
Item code: 5546-37875
|
|
10 TONNE HYDRAULIC BODY REPAIR KIT |
|
|
10 TONNE HYDRAULIC BODY REPAIR KIT
For use in the garage or bodyshop.
Contents:
• (A) 4 x Extension Bars 685, 455, 250, and 100mm
• (B) Serrated Cap
• (C) Hydraulic Spreading Wedge
• (D) Rubber Head 80mm diameter
• (E) Flat Serrated Base
• (F) Ram Toe
• (G) Plunger Toe
• (H) Cleft Head
• (J) "V" Base
• (K) Double End Male Snap Connector
• (L) 10 Tonne Pump Unit and Hose
• (M) Hydraulic Push Ram - length 470mm
Packed in sturdy steel case with styrofoam insert.
|
|
|
Item code: 5545-37874
|
|
4 TONNE HYDRAULIC BODY REPAIR KIT |
|
|
4 TONNE HYDRAULIC BODY REPAIR KIT
For use in the garage or bodyshop.
Contents:
• (A) 5 x Extension Bars 495, 420, 215, 100 and 85mm
• (B) Serrated Cap
• (C) Hydraulic Spreading Wedge
• (D) Rubber Head 60mm diameter
• (E) Flat Serrated Base
• (F) Ram Toe
• (G) Plunger Toe
• (H) Cleft Head
• (J) "V" Base
• (K) Double End Male Snap Connector
• (L) 4 Tonne Pump Unit and Hose
• (M) Hydraulic Push Ram - length 330mm
Packed in sturdy steel case with styrofoam insert.
|
|
|
Item code: 6708-13037
|
|
6 PIECE DOWEL PIN PUNCH SET |
|
|
6 PIECE DOWEL PIN PUNCH SET
Designed for the safe removal of spring dowel or roll pins. These specialist punches are manufactured from chrome vanadium steel, hardened and tempered to 45HRC and chemically blacked. The punch has a shaped end for positive location and an undersized body to prevent jamming. The punches are suitable for metric or imperial pins. Packed in plastic wallet and display packed.
Contents: 3.0 (1/8"), 4.0 (5/32"), 5.0 (3/16"), 6.5 (1/4"), 8.0 (5/16") and 9.5mm (3/8").
|
|
|
Item code: 10508-69721
|
|
CORROSION ASSESSMENT TOOL |
|
|
CORROSION ASSESSMENT TOOL
Expert Quality, combination tapping hammer, blunt scraper and short lever for checking corrosion levels in bodywork, panels and chassis. Suitable for use in MOT bays.
|
|
|
Item code: 5549-19193
|
|
DOOR PANEL REMOVAL TOOL |
|
|
DOOR PANEL REMOVAL TOOL
For break-free door panel clip removal.
|
|
|
Item code: 5554
|
|
DOOR PIN REMOVAL KIT |
|
|
DOOR PIN REMOVAL KIT
For the removal of hollow hinge pins. Comprises one square handle with chemically blacked finish and three pins manufactured from chrome vanadium steel with chemically blacked finish.
Sizes:
• 5.5mm O.D. x 3.5mm I.D.
• 6.5mm O.D. x 4.5mm I.D.
• 7.5mm O.D. x 5.5mm I.D.
*Sold loose
|
|
|
Item code: 12610-40142
|
|
DRAPER EXPERT 4 PIECE INFLATABLE BAG SET |
|
|
DRAPER EXPERT 4 PIECE INFLATABLE BAG SET
Expert Quality reinforced bags with Schraeder Valve and pump with rubber bulb-type hand inflator. Used for accurate alignment of body panel gaps before welding. Display packed in plastic wallet.
Contents:
• inflatable bag size: 185 x 40mm with Schraeder Valve
• inflatable bag size: 190 x 60mm with Schraeder Valve
• inflatable bag size: 160 x 60mm with Schraeder Valve
• hand pump with 120mm long flexible air delivery tube
These sets should be sold to bona fide garages and emergency service organisations only.
|
|
|
Item code: 5551-52580
|
|
WINDOW WINDER CLIP REMOVAL TOOL |
|
|
WINDOW WINDER CLIP REMOVAL TOOL
For the removal and installation of the spring clips used on window winder handles fitted on GM (Vauxhall/Opel) models. Can also be used on other vehicles with similar configurations. Manufactured from spring steel and chemically blacked with PVC dipped handle.
|
|
|