Steering & Suspension Tools

Separates ball joint from steering knuckles. Forged to withstand hard usage. Corrosion-resistant plated finish. 70mm deep capacity. Knurled shaft to ensure firm grip. Ideal for cars and light commercial vehicles.

Drop-forged, heat treated steel attachments. Hardened tempered precision machined steel bolts. Removes gears, pulleys, steering wheels and separates bearings.

10 TONNE HYDRAULIC PULLER KIT
Six position multi-function puller with adjustable two or three leg function. Allows bearings, gears, etc. to be removed with minimal effort by use of the hydraulic puller. Supplied with instruction manual. Packed in blow mould carrying case with display sleeve.
Contents:
•   hydraulic pump
•   3 puller legs
•   6 nuts and washers
•   6 link plates
•   2/3 leg puller yoke
•   nose adaptor
•   Min/Max Reach 0 - 150mm
•   Min/Max Spread 100 - 240mm

100MM - 115MM UNIVERSAL HUB PULLER
Plated ductile body casting with hardened screw for use on four stud wheels. Bolt centres 100-115mm.

19MM CAPACITY BALL JOINT PULLER
Forged body with hardened thrust bolt. Direct action puller with a jaw capacity of 19mm. Suitable for use on most cars and some light commercial vehicles.

19MM CAPACITY BALL JOINT SEPARATOR
Forged carbon steel body, plated finish with steel bolt. Jaw opening 19mm, maximum opening capacity 38mm. Length 140mm.

19MM CAPACITY FORK TYPE BALL JOINT SEPARATOR
Forged carbon steel body with plated finish, with jaw opening 19mm and throat depth 70mm.

19MM CAPACITY FORK TYPE LONG REACH BALL JOINT SEPARATOR
Forged carbon steel body with plated finish. Jaw opening 19mm and throat depth 70mm.

2 PIECE COIL SPRING COMPRESSOR SET
Wrap round claws with polished chrome finish. Lead screw manufactured from carbon steel hardened and tempered. Jaw design makes them suitable for use in confined areas. Maximum opening 220mm. Display carton.

250MM PAIR OF COIL SPRING COMPRESSORS
Hooks manufactured from tension ductile iron with galvanized finish. 16mm diameter carbon steel screws. Maximum opening 190mm.

3 PIECE COIL SPRING COMPRESSOR SET
Cast steel claws with safety hooks to prevent accidental release. Lead screw manufactured from carbon steel hardened and tempered with 1/2" square drive facility. Maximum opening 224mm. Display carton.

3 PIECE CV BOOT SERVICE KIT
Expert Quality, for the correct cutting, tensioning and clamping of the CV joint band.
Contents:
•   200mm precision CV boot band cutters for use on CV bands up to 6mm wide
•   225mm CV band cutting tool
•   240mm CV pliers for tightening ear-type CV bands. Reinforced 1/2" sq. dr. recesses in handle for the use of a breaker bar/ torque wrench where specific torque is required

37 PIECE BEARING POSITIONING KIT
Expert Quality, for the positioning of bearings without damage to the bearing or bearing cage. Lightweight and portable, ideal for use on location when servicing vehicles/machinery. Comprises dead blow hammer, three drift sleeves and 33 different-sized drifts to match individual bearings. Packed in blow mould case with display sleeve.
Contents:
•   650g dead blow hammer
•   3 x bearing drift sleeves
•   33 x drifts sizes from 10-26mm to 50-110mm

BALL JOINT SEPARATOR
Expert Quality, forged carbon steel body, plated finish with steel bolt. Adjustable jaw opening 19-21mm, maximum opening capacity 50mm.

BEARING, SEAL AND BUSH INSERTION/EXTRACTION KIT
Expert Quality, for the accurate and controlled insertion/removal of normal bearings, silent bearings, hydraulic bearings, rubber bearings, bearing bushes, shaft seals etc. Comprises 20 adaptor rings and four fine thread puller bars with hex. nut ends. Packed in blow mould carrying case and display sleeve.

Commercial Vehicle Hydraulic Ball Joint Separator Kit
Interchangeable jaws and forged carbon steel body allows ball joint on commercial vehicles to be removed with minimal effort by use of the hydraulic puller. Adjustable jaw opening with maximum opening capacity 95mm. Supplied with instruction manual. Packed in blow mould carrying case with display sleeve.
Contents:
•   hydraulic ram
•   1 x manual thrust bolt 19 x 103mm long(approx)
•   1 x manual thrust bolt 19 x 120mm long(approx)
•   1 x insert screw bung with 24mm hex
•   1 x 30mm jaw
•   1 x 34mm jaw
•   1 x 40mm jaw
•   1 x main body

CV BOOT TOOL
This tool allows the user to renew the CV boot of a vehicle without dismantling the CV joint. Manufactured from nylon with a 19mm hexagon bar fitted to the base.

Expert Coil Spring Compressor Kit
Expert Quality, suitable for both Macpherson Strut Coil Springs and conical springs. Interchangeable jaws allow the kit to be used on a wide range of vehicles. Safety overload system ensures protection for user while yoke protectors stop the springs from being damaged. Packed in blow mould plastic carrying case with display sleeve.
Contents:
•   Main body with 21mm hex. dr. and safety overload pin
•   2 x gold jaws (80-115mm dia.)
•   2 x black jaws (105-140mm dia.)
•   2 x silver jaws (145-190mm dia.)
•   3 x pairs of plastic covers
•   1 x extension bracket with hex key

Expert Pneumatic Cv Boot Stretcher
Expert Quality, innovative labour-saving tool for replacing "stretchy" type CV boots. Fitted with a 1/4" air inlet and operated in conjunction with a standard air line (sold separately). Lightweight construction with simple button control on handle opening the expanding arms to a maximum of 110mm. Suitable for most cars and small commercial vehicles but only in conjunction with "stretchy" style CV boots. Carton packed.
Specification:
Max: opening capacity   ...   110mm
Max: operating pressure   ...   100 psi (7bar)

Expert Suspension Arm Lever
Expert Quality, for use on suspension arm and hub work maintenance. Soft grip handle with adjustable hook allows easy use on either side of the vehicle. Adjustable fulcrum gives maximum leverage with minimum effort.

Expert Telescopic Spring Compressor Kit
Expert Quality; telescopic spring compressor with non-slip, three pronged arm feature for maximum grip. Allows the removal and replacement of coil springs on the suspension without dismantling the axle. Suitable for use on multi-link and independent suspensions (Max load capacity 1450kg). Display packed in blow mould case.

Expert Track Rod Adjusting Tool
Expert Quality, for loosening and adjusting stubborn track rods. The solid forged steel head and jaws allow more torque for less effort while the large surface area of the serrated jaws help prevent damage to the track rod. For use on 14-23mm diameter track rods. Overall length 385mm. Carton packed.

HYDRAULIC RAM AND SLIDE HAMMER HUB PULLER KIT
Expert Quality, comprises a ten slot universal hub adaptor plate for simple fitment to any hub bolt layout; a powerful 12 tonne hydraulic ram to remove the hub assembly and a 2.8kg slide hammer for the removal of stubborn hubs where controlled pressure is not required. Display packed in a blow mould case.

LARGE INSERT BEARING PULLER
Expert Quality, allows the removal of bearings where normal pullers are unable to be used. It locks into the bearing race itself. Manufactured from hardened and tempered steels chemically blacked for corrosion protection. Suitable for use with ISO bearing sizes: 6207-6011; 6305-6308 and 6403-6405. Packed in blow moulded case with display sleeve.
Contents:
•   Puller yoke with centre screw and twin arms
•   2 x threaded leg extensions
•   6 x ball ended threaded puller adaptors

PAIR OF COIL SPRING COMPRESSORS
Forged carbon steel claws hardened and tempered. M16x1.5mm screw manufactured from carbon steel hardened, tempered with a chemically blacked finish. Capacity 90-200mm. Carton packed.

PINCH JOINT SPLITTER KIT
Expert Quality, for precise and controlled spreading of suspension pinch joint/bolt on most vehicles. Fully adjustable to allow use with offset centre pinch points. Display packed in blow mould case with display sleeve.
Contents:
•   Puller body with 1/2" hex. drive
•   2 x puller legs with two hex. screws
•   2 x splitter wedges - 30° and 90°
•   2 locating pins - 8/10mm
•   2 locating pins - 10/13mm
•   hexagon key

SMALL INSERT BEARING PULLER
Expert Quality, allows the removal of bearings where normal pullers are unable to be used. It locks into the bearing race itself. Manufactured from hardened and tempered steels chemically blacked for corrosion protection. Suitable for use with ISO bearing sizes: 6004-6010; 6201-6206 and 6300-6302. Packed in blow moulded case with display sleeve.
Contents:
•   Puller yoke with centre screw and twin arms
•   2 x leg extensions
•   Centre screw thread cap
•   6 x ball ended threaded puller adaptors

Track Rod Removal Tool
Expert Quality, for the easy removal and installation of track rod knuckles. Driving end of 1/2" sq. dr. (inner) and 27mm hex. (outer). 360mm hollow internal sleeve length/400mm overall length. Handle knurled for extra grip.

TRIPLE LEG REVERSIBLE PULLER
Puller with three reversible legs for external and internal pulling of gears, bearings, etc. Legs are forged carbon steel and have long and short reach facility. Yoke and thrust bolt are manufactured from carbon steel. Screw has a rolled thread with chemically blacked finish.

TWIN & TRIPLE LEG REVERSIBLE PULLER
Puller with a two and three leg option for external and internal pulling of gears, bearings, etc. Legs are forged carbon steel and have long and short reach facility. Yoke and thrust bolt are manufactured from carbon steel. Screw has a rolled thread with chemically blacked finish. Supplied with twin and triple yoke that will take either two or three legs.

TWIN LEG REVERSIBLE PULLER
Puller with two reversible legs for external and internal pulling of gears, bearings, etc. Legs are forged carbon steel and have long and short reach facility. Yoke and thrust bolt are manufactured from carbon steel. Screw has a rolled thread with chemically blacked finish.